Hengjia biomass pomace dryer for sale
Overview of the pomace dryer Rotary drier is a drying machine used to dispose masses of materials. Due to its reliable working, flexible operation, good adaptation and large handling capacity, it is generally used in metallurgy, building materials, food, light industry, chemical engineering, coal industry and medicine. Rotary drier usually adapts to granular materials, but it also adapts to some water blending materials, dry sticky and pasty materials or high-moisture materials.
Technical parameters of the pomace dryer
Model | φ0.6×6-8 | φ0.8×8-10 | φ1.0×8-12 | φ1.2×10-14 | φ1.5×12-16 | φ1.8×16-20 | φ2.0×18-22 | φ2.2×20-24 | φ2.4×22-26 |
Diameter (mm) | 600 | 800 | 1000 | 1200 | 1500 | 1800 | 2000 | 2200 | 2400 |
Length (m) | 6-8 | 8-10 | 8-12 | 10-14 | 12-16 | 16-20 | 18-22 | 20-24 | 22-26 |
Thickness(mm) | 6 | 8 | 8 | 10 | 12 | 12 | 14 | 14 | 14 |
Volume (m3) | 1.7-2.3 | 4-5 | 6.3-9.4 | 11.3-15.8 | 21.2-28.3 | 40.7-50.9 | 56.5-69 | 76-91.2 | 99.5-117.6 |
Copy plate form | Lift type, distributed, fan form, |
Slope | 1-6% |
Fill rate | 8-15% |
Texture | Heat-resistant steel, stainless steel |
Usage temperature | ≤700C° |
evaporation intensity | 5-60Kgwater/m3.h |
Heat ways | Downstream and upstream, direct heat transfer, indirect heat transfer, compound heat transfer |
Heat source | Coal, oil, electricity, gas, steam, biofuels |
Rotate speed | 3-8 r/min |
Transmissio power | 3 Kw | 4 Kw | 5.5-7.5 Kw | 11-15 Kw | 15-18.5 Kw | 18.5-22 Kw | 22-30 Kw | 22-37 Kw | 37-55 Kw |
Corollary Equipment | Dehydration equipment, Conveyor equipment, hot blast stove, separation, dust removal equipment, induced draft fan, etc |
Heating source of pomace dryer
Working principle of the pomace dryer
In drying process, wet material is first sent to feed port by a conveyor, then to the stock guide by the chute inside the end socket, then to the cylinder. The cylinder is slant. The material enters from the higher end and gets out from the lower end. There is a shoveling plate installed on the inner wall of the cylinder, which lifts the material and scatter them to make them form a curtain, thus the material can have a full contact with the heat air, in that case, the drying speed is improved and the material moving speed is accelerated. Wet materials get heat directly or indirectly from the heat carrying agent when they are lifted and moving forward, so the moisture is evaporated. The evaporated moisture is discharged by the induced draft fan. Thus, the materials get dried and the dehydration is realized. After the heat carrying agent and wet air going through the
Rotary Drum Dryer, cyclone dust collector is usually needed to collect the material carried by the air. If further reduction of dust contained by the off-gas is needed, bag filter and hydrofilter can be used.
Delivery of pomace dryer
In order to save your time ,could you answer my question below? 1. what is the raw material? 2. what is the moisture content before drying and after drying? 3. what is the capacity? If you are interested in our
Rotary dryer, please kindly contact with us~~~ Skype: lisa.hjm Wechat: q-1061502554 Tel / WhatsAPP:+86-18317887657
Contact us if you need more details on Olive Pomace Dryer. We are ready to answer your questions on packaging, logistics, certification or any
Other aspects about Biomass Pomace Dryer for Sale、Olive Pomace Dryer. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Dryer Equipment > Rotary dryer